*Pro/E技术,资料, 教程等常见问题分类整理链接(有什么问题请先看这里）(页 1) - 『 Pro/Engineer 』 - 『 Pro/E资料区』 - 中国模具论坛模具,设计,论坛,中国模具,模具网,模具论坛,设计软件,模具软件,软件

jodanyin 2005-7-30 11:49

*Pro/E技术,资料, 教程等常见问题分类整理链接(有什么问题请先看这里）

相似的问题,有的提了很多次,有的也回答了很多次,既浪费了论坛的资源,又影响了大家看贴的心情. 所以如果您有什么问题,不妨到这里来找找,说不定就有您要找的答案; 


如果您有什么资料上传,也不妨到这里来看看, 说不定别人早已上传; 


如果您漫无目的,也可以上这里看看, 说不定就有意外发现. 





所有的链接,在陆续整理中,请大家不要在此贴里随便跟贴, 跟贴必删,本贴只作查询参考之用.


欢迎其它版主,贵宾及会员也能参与到此贴的整理链接中. 注意﹕敬請各位翻看此中的鏈接帖的會友們﹐不要再把你所翻看的帖子往上頂﹗﹗謝謝你們的合作
[align=right][color=#000066][此贴子已经被jliq1019于2005-11-15 9:13:15编辑过][/color][/align]

jodanyin 2005-7-30 11:52

工程图制作、排版打印 1:PTC公司最新的野火2.0工程图教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=176916&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=176916&replyID=&skin=1</A> 2:proe工程图中设置问题 <a href="http://www.mouldbbs.com/viewthread.php?tid=172970&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=172970&replyID=&skin=1</A> 3:如何解决中文Pro/E工程图汉字转AutoCAD后乱码问题 <a href="http://www.mouldbbs.com/viewthread.php?tid=172814&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=172814&replyID=&skin=1</A> 4:PRO/E工程图转CAD出现乱码的解决 <a href="http://www.mouldbbs.com/viewthread.php?tid=162463&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=162463&replyID=&skin=1</A> 5:符合国标的工程图配置文件 <a href="http://www.mouldbbs.com/viewthread.php?tid=171906&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=171906&replyID=&skin=1</A> 6:请教Pro/E的工程图可以像CAD一样设置线宽吗？ <a href="http://www.mouldbbs.com/viewthread.php?tid=170459&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=170459&replyID=&skin=1</A> 7:Pro/E工程图转AutoCAD的技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=169420&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=169420&replyID=&skin=1</A> 8:工程图中如何画中心线？ <a href="http://www.mouldbbs.com/viewthread.php?tid=161904&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=161904&replyID=&skin=1</A> 9:pro/e工程图中不剖筋板，如何实现？ <a href="http://www.mouldbbs.com/viewthread.php?tid=161550&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=161550&replyID=&skin=1</A> 10:工程图中如何标公差？ <a href="http://www.mouldbbs.com/viewthread.php?tid=150245&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=150245&replyID=&skin=1</A> 11:[原创]<<工程图入门与提高>>下载,文件已经上传完毕 <a href="http://www.mouldbbs.com/viewthread.php?tid=118299&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=118299&replyID=&skin=1</A> 12:Pro/E工程图框如何设置？ <a href="http://www.mouldbbs.com/viewthread.php?tid=104045&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=104045&replyID=&skin=1</A> 13:咱也来谈谈破衣的工程图 <a href="http://www.mouldbbs.com/viewthread.php?tid=94667&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=94667&replyID=&skin=1</A> 15:工程图制作技巧及问题大观园 <a href="http://www.mouldbbs.com/viewthread.php?tid=33284&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=33284&replyID=&skin=1</A> 16:Pro/E中的工程图有没有办法继承3D组装图零件的颜色? <a href="http://www.mouldbbs.com/viewthread.php?tid=30908&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=30908&replyID=&skin=1</A> 17:[原创] 非常用工程图教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=203967&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=203967&replyID=&skin=1</A> 18：<a href="http://www.mouldbbs.com/viewthread.php?tid=217460&replyID=&skin=1" target="_blank" >PROE轉DWG檔導入CAD時尺寸有變問題</A> 
[align=right][color=#000066][此贴子已经被jliq1019于2005-11-24 15:37:03编辑过][/color][/align]

jodanyin 2005-7-30 11:52

曲面设计, 拆面技巧、style技术应用 1:PROE的曲面设计 <a href="http://www.mouldbbs.com/viewthread.php?tid=171051&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=171051&replyID=&skin=1</A> 2:分享两个ISDN曲面设计实例 <a href="http://www.mouldbbs.com/viewthread.php?tid=97238&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=97238&replyID=&skin=1</A> 3:PRO/E的曲面设计(精华贴） <a href="http://www.mouldbbs.com/viewthread.php?tid=9395&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=9395&replyID=&skin=1</A> 4:野火style and restyle教程PDF <a href="http://www.mouldbbs.com/viewthread.php?tid=172376&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=172376&replyID=&skin=1</A> 5:经典的STYLE教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=117531&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=117531&replyID=&skin=1</A> 6:Style曲面连接控制 <a href="http://www.mouldbbs.com/viewthread.php?tid=98924&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=98924&replyID=&skin=1</A> 7:Style作的曲线为什么不能作为扫描的轨迹呀？ <a href="http://www.mouldbbs.com/viewthread.php?tid=62580&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=62580&replyID=&skin=1</A> 8:野火style与2001style 区别 <a href="http://www.mouldbbs.com/viewthread.php?tid=52003&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=52003&replyID=&skin=1</A> 9:分享两个ISDN曲面设计实例 <a href="http://www.mouldbbs.com/viewthread.php?tid=97238" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=97238</A> 10:绝对经典曲面设计 <a href="http://www.mouldbbs.com/viewthread.php?tid=157832" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=157832</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-3 22:28:46编辑过][/color][/align]

jodanyin 2005-7-30 11:53

钣金件讨论 1:[原创]个人作品－油箱钣金件 <a href="http://www.mouldbbs.com/viewthread.php?tid=98656&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=98656&replyID=&skin=1</A> 2:发点精华贴！proe钣金件设计教程零件练习库 <a href="http://www.mouldbbs.com/viewthread.php?tid=145039&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=145039&replyID=&skin=1</A> 3:怎样利用一个凹模作冲压钣金件？搞了半天也没弄出来 <a href="http://www.mouldbbs.com/viewthread.php?tid=80678&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=80678&replyID=&skin=1</A> 4:PTC钣金件设计资料 <a href="http://www.mouldbbs.com/viewthread.php?tid=30655&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=30655&replyID=&skin=1</A> 5:林清安《Pro/E 钣金件设计》配书实例 <a href="http://www.mouldbbs.com/viewthread.php?tid=4724&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=4724&replyID=&skin=1</A> 6:林清安Wildfire2钣金设计2CD！今年4月才出版的 <a href="http://www.mouldbbs.com/dispbbs.asp?boardid=20&replyid=182130&id=182130&page=2&skin=0&Star=1" target="_blank" >http://www.mouldbbs.com/dispbbs.asp?boardid=20&replyid=182130&id=182130&page=2&skin=0&Star=1</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-5 13:57:59编辑过][/color][/align]

jodanyin 2005-7-30 11:53

模具设计经验、开模技巧、EMX应用 1:模具设计的十大技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=167713&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=167713&replyID=&skin=1</A> 2:林清安模具设计经典教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=152659&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=152659&replyID=&skin=1</A> 3:PTC模具设计基础（注塑） <a href="http://www.mouldbbs.com/viewthread.php?tid=151533&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=151533&replyID=&skin=1</A> 4:PROE塑料模具设计入门与实践 <a href="http://www.mouldbbs.com/viewthread.php?tid=141100&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=141100&replyID=&skin=1</A> 5:注塑模具设计方发 <a href="http://www.mouldbbs.com/viewthread.php?tid=129674&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=129674&replyID=&skin=1</A> 6:模具设计102例 <a href="http://www.mouldbbs.com/viewthread.php?tid=122850&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=122850&replyID=&skin=1</A> 7:PROE学习交流(浅谈骨架模型在产品及模具设计中的应用) <a href="http://www.mouldbbs.com/viewthread.php?tid=52386&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=52386&replyID=&skin=1</A> 8:EMX40安装在proe2001详解 <a href="http://www.mouldbbs.com/viewthread.php?tid=62989&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=62989&replyID=&skin=1</A> 9:Proe/EMX里面如何设置顶杆 <a href="http://www.mouldbbs.com/viewthread.php?tid=55555&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=55555&replyID=&skin=1</A> 10:EMX模具设计专家 <a href="http://www.mouldbbs.com/viewthread.php?tid=42133&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=42133&replyID=&skin=1</A> 11:关于EMX语言的问题 <a href="http://www.mouldbbs.com/viewthread.php?tid=41614&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=41614&replyID=&skin=1</A> 12:第一次使用EMX+渲染 <a href="http://www.mouldbbs.com/viewthread.php?tid=32698&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=32698&replyID=&skin=1</A> 13:PTC EMX 安装说明 <a href="http://www.mouldbbs.com/viewthread.php?tid=19999&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=19999&replyID=&skin=1</A> 14:Pro/E分模十点小技 <a href="http://www.mouldbbs.com/viewthread.php?tid=193002" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=193002</A> 15:裙边分模技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=162924" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=162924</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-5 13:35:50编辑过][/color][/align]

jodanyin 2005-7-30 11:54

产品ID、作品展示、渲染技术 1:Pro/E的颜色设置(想渲染的朋友不要错过哟) <a href="http://www.mouldbbs.com/viewthread.php?tid=165376&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=165376&replyID=&skin=1</A> 2:最新作品展示 <a href="http://www.mouldbbs.com/viewthread.php?tid=138897&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=138897&replyID=&skin=1</A> 3:Pro/E原创作品,虽然初学渲染,但强烈要求加分 <a href="http://www.mouldbbs.com/viewthread.php?tid=167335&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=167335&replyID=&skin=1</A> 4:野火渲染材质库 <a href="http://www.mouldbbs.com/viewthread.php?tid=167138&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=167138&replyID=&skin=1</A> 5:独一无二的PTC顶级渲染教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=162371&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=162371&replyID=&skin=1</A> 6:Pro/E产品精华集(高级造型和渲染）有教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=154273&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=154273&replyID=&skin=1</A> 7:Pro/E—WF渲染图片教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=84564&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=84564&replyID=&skin=1</A> 8:手机渲染!!!!!V70,原创!! <a href="http://www.mouldbbs.com/viewthread.php?tid=158932&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=158932&replyID=&skin=1</A> 9:电话机的设计与渲染[贴图] <a href="http://www.mouldbbs.com/viewthread.php?tid=73467&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=73467&replyID=&skin=1</A> 10:飞机Pro/E绘制、渲染（欣赏) <a href="http://www.mouldbbs.com/viewthread.php?tid=49457&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=49457&replyID=&skin=1</A> 11:轿车Pro/E绘制、渲染（欣赏） <a href="http://www.mouldbbs.com/viewthread.php?tid=49455&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=49455&replyID=&skin=1</A> 12:一个有个关于渲染的教程-镜框 <a href="http://www.mouldbbs.com/viewthread.php?tid=34610&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=34610&replyID=&skin=1</A> 13:Pro/E渲染快速参考卡 <a href="http://www.mouldbbs.com/viewthread.php?tid=21993&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=21993&replyID=&skin=1</A> 14:Pro/E渲染图,其他软件能做到这样的渲染效果吗? <a href="http://www.mouldbbs.com/viewthread.php?tid=8259&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=8259&replyID=&skin=1</A> 
[align=right][color=#000066][此贴子已经被作者于2005-7-31 10:24:08编辑过][/color][/align]

jodanyin 2005-7-30 11:55

Wildfire(野火)相关 1:Pro/E Wildfire 2.0 十大新功能 <a href="http://www.mouldbbs.com/viewthread.php?tid=98607&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=98607&replyID=&skin=1</A> 2:Pro/E wildfire 分模实战中的问题 <a href="http://www.mouldbbs.com/viewthread.php?tid=150348&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=150348&replyID=&skin=1</A> 3:Wildfire2.0之新功能之杂锦 <a href="http://www.mouldbbs.com/viewthread.php?tid=95319&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=95319&replyID=&skin=1</A> 4:林清安Advanced Surface with Wildfire 曲面设计视频 <a href="http://www.mouldbbs.com/viewthread.php?tid=94579&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=94579&replyID=&skin=1</A> 5:林清安ProENGINEER Wildfire 曲面设计进阶视频 <a href="http://www.mouldbbs.com/viewthread.php?tid=95107&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=95107&replyID=&skin=1</A> 6:Pro/E Wildfire2.0体验之旅 <a href="http://www.mouldbbs.com/viewthread.php?tid=78060&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=78060&replyID=&skin=1</A> 7:Wildfire下如何修补igs破面? <a href="http://www.mouldbbs.com/viewthread.php?tid=67130&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=67130&replyID=&skin=1</A> 8:如何去掉Pro/E WILDFIRE中的浏览器? <a href="http://www.mouldbbs.com/viewthread.php?tid=47590&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=47590&replyID=&skin=1</A> 9:在Pro/E Wildfire中的贴花 <a href="http://www.mouldbbs.com/viewthread.php?tid=38636&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=38636&replyID=&skin=1</A> 10:Pro/E Wildfire实体曲面的选取方法 <a href="http://www.mouldbbs.com/viewthread.php?tid=32749&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=32749&replyID=&skin=1</A> 11:Pro/E Wildfire中--镜向--问题 <a href="http://www.mouldbbs.com/viewthread.php?tid=30447&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=30447&replyID=&skin=1</A> 12:Pro/E Wildfire使用技巧锦集[视频] <a href="http://www.mouldbbs.com/viewthread.php?tid=20385&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=20385&replyID=&skin=1</A> 13:Pro/E Wildfire的Mouse操作 <a href="http://www.mouldbbs.com/viewthread.php?tid=3850&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=3850&replyID=&skin=1</A> 14:野火视频教学，解压后205M <a href="http://www.mouldbbs.com/viewthread.php?tid=141481" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=141481</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-3 22:30:43编辑过][/color][/align]

jodanyin 2005-7-30 11:55

机构仿真，动画模拟 1.Pro/E Mechanica之设置 <a href="http://www.mouldbbs.com/viewthread.php?tid=149753" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=149753</A> 2:牛头刨床运动仿真视频教程 <a href="http://www.mouldbbs.com/viewthread.php?tid=195453&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=195453&replyID=&skin=1</A> 3:模拟仿真(凸轮机构) <a href="http://www.mouldbbs.com/viewthread.php?tid=177103&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=177103&replyID=&skin=1</A> 4:模拟仿真(四连杆机构) <a href="http://www.mouldbbs.com/viewthread.php?tid=177098&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=177098&replyID=&skin=1</A> 5:[原创]简单的齿轮运动仿真 <a href="http://www.mouldbbs.com/viewthread.php?tid=53465&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=53465&replyID=&skin=1</A> 6:Pro/E野火版运动仿真与有限元分析配套文件下载 <a href="http://www.mouldbbs.com/viewthread.php?tid=164608&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=164608&replyID=&skin=1</A> 7:仿真运动的六轴机器人以及仿真动画 <a href="http://www.mouldbbs.com/viewthread.php?tid=142186&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=142186&replyID=&skin=1</A> 8:[推荐]Pro/E运动仿真方面的学习资料 <a href="http://www.mouldbbs.com/viewthread.php?tid=101507&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=101507&replyID=&skin=1</A> 9:Pro/E Mechanism机构运动仿真实例 <a href="http://www.mouldbbs.com/viewthread.php?tid=98636&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=98636&replyID=&skin=1</A> 10:Pro/E的仿真教程[下载][分享] <a href="http://www.mouldbbs.com/viewthread.php?tid=15677&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=15677&replyID=&skin=1</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-3 23:39:56编辑过][/color][/align]

jodanyin 2005-7-30 11:56

操作环境与界面&参数设置 1:Pro/E参数设置 <a href="http://www.mouldbbs.com/viewthread.php?tid=29525&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=29525&replyID=&skin=1</A> 2:菜鸟再求助!怎样把英文界面改成中文界面？ <a href="http://www.mouldbbs.com/viewthread.php?tid=122364&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=122364&replyID=&skin=1</A> 3:界面文字很小怎么调大点啊？ <a href="http://www.mouldbbs.com/viewthread.php?tid=118889&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=118889&replyID=&skin=1</A> 4:中英文的界面的设置方法 <a href="http://www.mouldbbs.com/viewthread.php?tid=73877&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=73877&replyID=&skin=1</A> 5:分享: 中英文都有的Pro/E界面 <a href="http://www.mouldbbs.com/viewthread.php?tid=73615&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=73615&replyID=&skin=1</A> 6:怎样设置Pro/E2001的中英双语界面？ <a href="http://www.mouldbbs.com/viewthread.php?tid=35423&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=35423&replyID=&skin=1</A> 7:Pro/E启动界面图 <a href="http://www.mouldbbs.com/viewthread.php?tid=84049&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=84049&replyID=&skin=1</A> 8:参数设置？关于工程图! <a href="http://www.mouldbbs.com/viewthread.php?tid=122851&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=122851&replyID=&skin=1</A> 9:PRO-E的经典设置，不可不看！！！ <a href="http://www.mouldbbs.com/viewthread.php?tid=52538" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=52538</A> config详解 <a href="http://www.mouldbbs.com/dispbbs.asp?boardid=20&replyid=168500&id=168500&page=1&skin=0" target="_blank" >http://www.mouldbbs.com/dispbbs.asp?boardid=20&replyid=168500&id=168500&page=1&skin=0</A>
[align=right][color=#000066][此贴子已经被jliq1019于2005-12-19 8:48:18编辑过][/color][/align]

jodanyin 2005-7-30 11:56

实用技巧,参考资料 1:Pro/E工程图转AutoCAD的技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=169420&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=169420&replyID=&skin=1</A> 2:[分享]模具设计的十大技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=167713&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=167713&replyID=&skin=1</A> 3:裙边分模技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=162924&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=162924&replyID=&skin=1</A> 4:Pro/E超级技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=128102&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=128102&replyID=&skin=1</A> 5:野火版使用技巧锦集[视频]:boundary曲面的相切控制 <a href="http://www.mouldbbs.com/viewthread.php?tid=83387&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=83387&replyID=&skin=1</A> 6:Pro/E经典分模题，测试你是否真正掌握分模技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=49510&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=49510&replyID=&skin=1</A> 7:Pro/E在加工方面的应用及技巧 <a href="http://www.mouldbbs.com/viewthread.php?tid=35817&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=35817&replyID=&skin=1</A> 8:Pro/E资料一贴打尽,不信版主不加精！ <a href="http://www.mouldbbs.com/viewthread.php?tid=152341&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=152341&replyID=&skin=1</A> 9:IGS破面修补资料大全 <a href="http://www.mouldbbs.com/viewthread.php?tid=83659&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=83659&replyID=&skin=1</A> 10:Pro/E资料库 <a href="http://www.mouldbbs.com/viewthread.php?tid=45658&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=45658&replyID=&skin=1</A> 11:方便大家下载，pro/e资料集中上传！ <a href="http://www.mouldbbs.com/viewthread.php?tid=30496&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=30496&replyID=&skin=1</A> 12:使用旧版破衣打开新版破衣 <a href="http://www.mouldbbs.com/viewthread.php?tid=109643" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=109643</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-1 11:06:43编辑过][/color][/align]

jodanyin 2005-7-30 12:41

安装问题 1:安装Pro/E Wildfire 2 的换盘问题 <a href="http://www.mouldbbs.com/viewthread.php?tid=190689&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=190689&replyID=&skin=1</A> 2:原创多图proewildfire2003100安装说明，看看也过瘾 <a href="http://www.mouldbbs.com/viewthread.php?tid=19939&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=19939&replyID=&skin=1</A> 3:教你快速将破衣2。0~3。0改锁定为浮动安装（含License生成器） <a href="http://www.mouldbbs.com/viewthread.php?tid=189174" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=189174</A> 4:ptc emx 安装说明[原创] <a href="http://www.mouldbbs.com/viewthread.php?tid=19999" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=19999</A> 5.[转帖]pro/e安装乾坤大挪移法 <a href="http://www.mouldbbs.com/viewthread.php?tid=223836" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=223836</A> 
[align=right][color=#000066][此贴子已经被jliq1019于2005-10-24 9:04:17编辑过][/color][/align]

jodanyin 2005-8-1 11:10

逆向工程,三维测数 1:美丽的大脚---抄数与造型工具的完美结合 <a href="http://www.mouldbbs.com/viewthread.php?tid=145477" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=145477</A> 2:逆向工程基本常识 <a href="http://www.mouldbbs.com/viewthread.php?tid=122988&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=122988&replyID=&skin=1</A> 3:PTC的逆向工程(RE)工具 <a href="http://www.mouldbbs.com/viewthread.php?tid=98618&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=98618&replyID=&skin=1</A> 4:逆向工程技术在模具制造中的应用 <a href="http://www.mouldbbs.com/viewthread.php?tid=94797&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=94797&replyID=&skin=1</A> 5:Surfacer在逆向工程中的应用 <a href="http://www.mouldbbs.com/viewthread.php?tid=84057&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=84057&replyID=&skin=1</A> 6: 谈谈pro/e逆向工程 <a href="http://www.mouldbbs.com/viewthread.php?tid=80655&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=80655&replyID=&skin=1</A> 7: 新手学PROE怎能不学抄数？（速成之路） <a href="http://www.mouldbbs.com/viewthread.php?tid=109265&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=109265&replyID=&skin=1</A> 8:抄数的资料！给你练习！ <a href="http://www.mouldbbs.com/viewthread.php?tid=61200&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=61200&replyID=&skin=1</A> 9:抄数题(加分） <a href="http://www.mouldbbs.com/viewthread.php?tid=23393&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=23393&replyID=&skin=1</A> 10:来一个点抄数的，感兴趣的来做做吧！ <a href="http://www.mouldbbs.com/viewthread.php?tid=134280&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=134280&replyID=&skin=1</A> 11:抄数车仔图 PRT绝对精典我做了一个礼拜 <a href="http://www.mouldbbs.com/viewthread.php?tid=118363&replyID=&skin=1" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=118363&replyID=&skin=1</A> 12:逆向工程练习[转帖] <a href="http://www.mouldbbs.com/viewthread.php?tid=59635" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=59635</A> 
[align=right][color=#000066][此贴子已经被作者于2005-8-5 13:46:22编辑过][/color][/align]

wf_1999 2005-8-5 11:43

我来补充！ PROE精度问题、proe工程图打印设置、将PRO/E的图形放到word文档 <a href="http://www.mouldbbs.com/viewthread.php?tid=102924" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=102924</A> <a href="http://www.mouldbbs.com/viewthread.php?tid=216895" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=216895</A>
[align=right][color=#000066][此贴子已经被作者于2005-9-26 10:27:11编辑过][/color][/align]

wf_1999 2005-8-5 11:47

PROE WILDFIRE 2.0 快捷键
<a href="http://www.mouldbbs.com/viewthread.php?tid=154440" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=154440</A>

wf_1999 2005-8-5 17:07

pro－e的安装（野火、01）
<a href="http://www.mouldbbs.com/viewthread.php?tid=190608" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=190608</A>

wf_1999 2005-8-8 11:44

在Pro\e里用上 (方正舒体)(华文彩云)等字体的方法 
<a href="http://www.mouldbbs.com/viewthread.php?tid=204114" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=204114</A>

杯水情哥 2005-8-12 09:30

建议:把你想要的地址复制过去,把后面的=1去掉,以免进入之后只能一楼一楼的看,省得麻烦. 1软件下载.了解FTP的:
<a href="http://www.mouldbbs.com/viewthread.php?tid=148257" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=148257</A> 2曲面课题 http://www.mouldbbs.com/viewthread.php?tid=2043233.我个人设置的配置文件,2001版包括一些快捷键.<a href="http://www.mouldbbs.com/viewthread.php?tid=184476" target="_blank" > http://www.mouldbbs.com/viewthread.php?tid=184476</A> 3.PROE的快速安装和修复安装。 http://www.mouldbbs.com/viewthread.php?tid=211979 4.RROE的特征复制和阵列教程. <a href="http://www.mouldbbs.com/viewthread.php?tid=206647&replyID=&skin" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=206647&replyID=&skin</A> 
[align=right][color=#000066][此贴子已经被作者于2005-9-22 18:52:48编辑过][/color][/align]

wf_1999 2005-9-2 17:45

ＰＲＯ／Ｅ质量怎么计算！！
<a href="http://www.mouldbbs.com/viewthread.php?tid=210424" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=210424</A>

zjrzpr 2005-9-12 12:03

zai ding

lincolnal 2005-9-13 11:14

求助.在PROE里如何做阿基米德螺旋线.
有哪位高手做得出来.
发我信箱<a href="mailtxiezuowei@tom.com" target="_blank" >xiezuowei@tom.com</A>
thx

hc281 2005-9-13 16:42

谢谢

hc281 2005-9-13 17:02

谢谢

大内密探 2005-9-14 11:12

俺没有权限看精华贴字。郁闷。

ht00 2005-9-14 11:19

全是宝贝啊，真是多谢了！
我有一种阿拉巴巴找到宝藏的感觉！！！！！！
[em02][em02][em02]

hero325 2005-9-18 22:25

说我权限不够，要支持新人啊，希望大家不要设权限

wf_1999 2005-9-21 15:35

好东西，proe图框文件汇总 <a href="http://www.mouldbbs.com/viewthread.php?tid=85156" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=85156</A>

sunluxi 2005-9-22 19:02

Pro/ENGINEER Wildfire 3.0 可以使用汉字输特征名啦！ Pro/ENGINEER Wildfire 3.0 Preproduction 提示可以使用双字节文字啦! After you install support for a given non-English language on an English system, you can do the following operations： Display language-specific characters in Pro/ENGINEER files.文件名可以用中文 Input and edit text containing language-specific characters in Pro/ENGINEER files.特征名亦可 Display the localized user interface.本地化接口也能用中文 Print language specific characters.打印也OK,,WF2.0也可以的。 当然，proe的工作未到家，双字节的输入有相当一部分不能用，但毕竟我们期待了6年啦！ Multi-byte Character Input Areas within Pro/ENGINEER have multi-byte character input enabled or disabled. See the table below. Pro/ENGINEER Area Multi-byte Enabled Multi-byte Disabled Assembly None Zone namesFamily Table instance names Enveloe names Piping names Fundamentals (Core) Parameter namesParameter values (string values) Feature names RelationsView names Light Source names Cosmetic dimension/text (not symbol) Cross-section names FEM constraint-case names Beam-section names Model notes Family Table instance names Material names Cosmetic dimension symbols Group names UDF library names Simplified Representation names Layer names 3D text in featuresconfig.pro file Folder names Detailing Notes Balloon Notes Group name Table text Axis names Draft itemsS ymbol names Draft datum namesLine style names Diagram None Spool Names Layout Case Study names Draft datums Manufacturing NC sequence comments Fixture names Workcell namesSite names Register names Radius substitute table names Operation namesVolume names NC sequence names Process Step description None

sunluxi 2005-9-22 19:20

Asian and European Languages
The user interface of Pro/ENGINEER Wildfire 3.0 Preproduction is only available in French, German,
and Japanese. The related documentation is in English only. These three languages are supported on all
platforms (see above) with the following exception: Japanese is not supported on Linux.
The localized versions of the documentation for French, German, and Japanese as well as the user
interface and related documentation for Italian, Korean, Simplified Chinese, Traditional Chinese and
Spanish will be available with the Production release of Pro/ENGINEER Wildfire 3.0.
虽然proe wf3.0 预发行版只有英、法、德、日语，这是喜讯，proe wf3.0 预发行版还有许多闪光亮点，个中乐趣自己品尝。但支持中文输入，炎黄子民的大信息量的方块字能用上，真是一大顺应民心的进步！进到PDM亦可，对作整机设计的真是福音，不用到CAXA、SOLIDWORK等等倒手啦！本来用proe作注塑模具设计就是一种资源浪费！

sunluxi 2005-9-22 19:21

About Multi-byte File Name and Character Support
To process text on a computer, unique numbers are assigned to each letter or character in a language. This assignment is referred to as encoding. European languages (single-byte languages) use about 150 characters. Therefore, the numeric range of a single byte (0—255) is sufficient to encode European languages. Asian languages (multi-byte languages) use thousands of characters, requiring multiple bytes to store the numeric code of a single character. 
Pro/ENGINEER provides universal support for single-byte languages. For multi-byte languages there are some limitations as described in the next two tables.
File Types Supporting File Names with Multi-byte Strings。
^_^

MSC_chl 2005-9-24 21:06

怎么不能下呀！

什么好咚咚呀，怎么不能下？

ningyang 2005-9-25 00:37

我用的是XP sp2系统！安装PRO/E2003的时候，已经安装成功了，但是就是打不开！当我点击打开的时候，出现PRO/E的进入画面了，过2秒就自动关闭系统了，小弟不知道是什么原因！在别人的机子上就可以打开！有高人能指点一下吗？

wf_1999 2005-9-26 13:41

怎样在PRO/E2001里导入PDF/JPG文件 <a href="http://www.mouldbbs.com/viewthread.php?tid=216898" target="_blank" >http://www.mouldbbs.com/viewthread.php?tid=216898</A>

纳米虫 2005-10-4 09:03

流口水了。

lkalkalka 2005-10-5 10:05

有不有管道设计方面的教程！帮助里的东东看不明白！有哪位好心人传上来呀，小弟在此谢过！

good83630 2005-10-6 15:30

顶！！！

oyj001 2005-10-6 18:19

我也一样

lylyly 2005-10-9 17:26

Thanks

dingjian 2005-10-10 15:03

谢了

king1982 2005-10-11 12:26

<TABLE fixed; WORD-BREAK: break-all" height="85%" width="95%" align=center border=0>

<TR>
<TD 9pt; LINE-HEIGHT: 12pt" vAlign=top width=* height="100%"><IMG src="http://www.mouldbbs.com/Skins/Default/topicface/face1.gif"> Ｐro_E野火版2.0安装后的运行问题 
我安装了Ｐro_E野火版2.0，但是用电脑打不开．系统什么也不提示，我在任务管理器中去看，它的运行程序只运行了一下就没有了！！ 请问各位大哥，这是什么原因是？？ 电脑的内存是１９２ＭＢ的！ 网卡是集成的！</TD></TR></TABLE>

yanhw 2005-10-14 10:51

zhen shi xie xie

查看完整版本: *Pro/E技术,资料, 教程等常见问题分类整理链接(有什么问题请先看这里）

*Pro/E技术,资料, 教程等常见问题分类整理链接(有什么问题请先看这里）

怎么不能下呀！